Waterproof High Quality Made in China 400W LED Driver

12VDC

24VDC

12VDC± 0.5VDC

24VDC± 0.5VDC

Max 33.4A

Max 16.7A

Max 400W

0~400W

<= 120mV

<= 240mV

± 1%

± 1%

Start-up Time (Typ)

450ms/230VAC 500ms/115VAC

200ms/230VAC 200ms/115VAC

175-264Vac or 100-130Vac

50/60Hz

3.3A/230Vac or 5.8A/115Vac

PF> 0.6

No-load power consumption

＜3W

Efficiency (typ.)

90%

90%

Inrush current(typ.)

Cold start 70A at 230Vac

L,N:2KV L,N-PE:4KV

Max. 0.5mA

ta: -30℃ C~ 50℃ C tc: 80℃ C

20 ~ 99%RH, condensing(Waterproof)

Storage temp., humidity

-40℃ C ~ 80℃ C, 10~95%RH

Protection type: Turn off the output voltage, after the temperature drops, re-energize to restore.

Shut down the output when current load >= 110%~150%, auto recovers.

Protection type: It can be automatically restored after the fault is eliminated.

I/P-O/P: 100MΩ /500VDC/25℃ C/70%RH

IEC/EN61347; IEC/EN60950; IP67

EN55015: 2013; EN61547: 2009; EN61000-3-2:2014; EN61000-3-3:2013

100% of the product is fully loaded and impacted for 4 hours under an environment of at least 40℃ C± 5℃ C

Under the steady-state conditions of rated input and output, the stress of components will not exceed its maximum nominal value

All parameters not specifically mentioned are measured at 230VAC input, rated load and 25℃ C ambient temperature.

Ripple and noise test method: connect 0.1uF and 47uF capacitors in parallel at the terminal, and measure under 20MHZ bandwidth.

Ensure that the power supply is used under the rated parameters and environment.